Rain-X Washer Fluid Additive

Works very well to supplement washer fluid. 👍

Used together (Rain-X + SONAX Clear View 1:100), my 2023 Model Y’s windshield went from dusty/filmy to crystal clear after one wipe—exactly what the pics show (before / mix / after). Beads water nicely, cuts road film, and played fine with the OEM wipers. Pros Instant clarity; no smearing Strong water beading for rain driving Cost-effective: small amounts treat a lot of fluid Tesla Y compatible (no chatter from my blades) Cons Add too much and you can get light residue—measure your mix My mix (works great): SONAX Clear View: 1:100 (≈25 ml per 2.5 L / ~0.85 fl oz per 2.6 qt) Rain-X Additive: ~4–4.5 fl oz per gallon of water (the 16.9 oz bottle treats ~4 gal) Tips Start conservatively on Rain-X; you can add more if needed. Top up with distilled water when possible. If switching from another fluid, run a few sprays to purge the old mix. Bottom line: this combo is an easy, inexpensive one-wipe to crystal-clear upgrade.

Great product, works really well when having the main Rain-X application on the windshield. Used it on my 14 hour trip, rained a few times. Kicked on the wipers and fluid when it was raining quite bad and it helped fling off the droplets more.

Works great

I put like three different forms of this stuff on my car, it just works. I know there's a lot of people that say it doesn't work and leaves streaks, but pleassssseee hear me out. Their products have so much potential and are underrated. I put this $&@# on my windshield and it leaves opaque streaks!?! -First grab some old newspaper and windex. Clean the windshield until it's undoubtedly clean. -Now grab your regular strength rain-x and apply generously. You will know if it was properly applied if you see an opaque film. If you do not see a definite enough opaque film, you need to reapply a second time (after elbow greasing the existing opaque streaks out) Do not use any more wet products to clean after your complete starting clean on your windshield. Remember to always do one extensive cleaning first before your project. -After applied properly you will see slightly opaque streaks throughout the entire windshield. The more consistent the film color is, the better it is applied. You con continue to even it out and keep applying as long as you use a dry rag to remove the existing film. Once you are satisfied with the amount of product used, grab a clean side of another rag and remove all film until it is completely transparent. -You will know if it is properly applied when you use your wipers with water on the windshield if for a split second after the wipers go over, you see hints of opaque reappearing behind the wipers. At this point add your windshield wiper concentrate to have your coat reapplied as you use. (Use your wipers for 5 seconds once a week or so) Now the coat stays there, and lasts much longer. If your at this point and you still see streaks, you didn't clean your windshield extensively enough the first time. You can always go back and elbow grease everything out before trying again. These streaks are not permanent, it's what a proper coating looks like, which might take some getting used too. The best case scenario for this product is highway while it's raining. You will need to use your wipers so much less because the water will bead up together and fly off. This product makes you rely less on your wipers. Still use them, but you'll notice that your not struggling to see even in the heaviest rain because there's 60-80% more visibility because the water sticks to each other instead of the windshield (so most of it beads up together and slides down). It's not magic, water still is on your windshield it just changes the properties of the surface. Really just added safety to your car. And I'm all for safety and visibility on the road. That's why I recommend it, it takes the edge out of driving in the rain and is just more added safety. If you're going with rain-x, go with both! I would not recommend just going with one or the other, they really work together so much better. Even car washes use this stuff haha! You just get a lot more concentrated stuff here on amazon. One of my favorite brands ever, highly recommend! Elbow grease those streaks out until it's clear and you're going to love the results. Sincerely, A Rain-X Addict.

This washer fluid works well and helps keep the windshield clear. It was easy to pour in and a good price for something I use all the time. The bottle was small but did not leak.

Packaging sucks but this is not Rain-X’s problem. This additive works with all kinds of washer fluid. As an additive of course it’s not a rain proof treatment. Do not expect it. But it enhances the rain repellent. Works great, and if you clean your glass first you will have a loooonger period to build the same watermark you’re currently having.

Rain x usually works great,not sure on this one. Ads to washer fluid made my windshield very hazy, will not was off. Used according to directions

私は、まず、500mlのペットボトルにウオッシャー液を約490ml入れて、この液を僅か5から10ml入れると、ウオッシャー液の濃度に関わらずかなりの撥水機能を発揮します。又、ワイパーの汚れを取りながら塗り込むと、ガラスとの摩擦が無くなるのか、ガタガタが無くなり、僅かな雨の時でもスムーズに撥水してくれます。 お勧めです。

Excelente repelente de lluvia, sirve para varios depósitos de limpiaparabrisas!!

It work perfectly in rain,

Excellent, rain just bleeds of the screen. Works in conjunction with rainx screen cleaner very effectively. Will always use going forward.

Recommend