Description:
When transmitting circuits, the voltage signal increases with weak transmission distance. When using the power transmission, signal weakening can be avoided. This module is used to end the current signal transmission, the signal into a voltage signal for single-chip detection. Support for power input 4-20Ma, 0-20mA, support for voltage output 0-3.3V 0-5V 0-10V

Features:
Wide supply voltage range, the output voltage to support multiple areas
Zero and range can be adjusted
High stability, good linearity, industrial quality.
Current signal sampling resistor with high precision colour ring resistance, high precision, temperature drift small, high performance.

Instructions for use:
1. Module according to the definition of the wiring, supply voltage 7-36 V (if the output is to 10 V, the supply voltage must be greater than 12 V).
2. After power on, the D2 indicator should light up, otherwise check the line connection. Circuit board with reverse polarity protection, reverse polarity does not burn.
3. If the current input is the minimum, adjust the Zero potentiometer so that the VOUT output is the minimum
4. When the current input is maximum (20mA), adjust the SPAN potentiometer so that the VOUT output is maximum

Choose the appropriate area via the jumper cap as needed:
4 - 20 mA: 0 - 2.5 V. Range: J1 1.2 feet short, 3.4 feet short circuited.
0 - 3.3 V range: J1 1.2 feet off, 3.4 feet from
0-5.0V Range: J1 1.2 feet short, 3.4 feet short circuited.
0 - 10.0V Range: J1 1.2 feet short, 3.4 feet away.
0 - 20 mA: 0 - 3.3 V. Range: J1 1.2 feet short, 3.4 feet short circuited.
0-5.0V Range: J1 1.2 feet short, 3.4 feet short circuited.
0 - 10.0V Range: J1 1.2 feet short, 3.4 feet away

Current Voltage Transmitter to Voltage Module 0/4-20mA to 0-3.3V 5V 10V

Details

Description

Common Questions