Rapid Safe Wall Mount for Long Guns

Great wall safe its extremely sturdy and it weighs a lot more than I was expecting I can tell it will definitely do its job very well if someone ever tries to get the gun off the wall. One thing I will say is you do have to slam it really hard to get it to latch but its super sturdy so it doesn’t feel like its going to break or damage it. Definitely recommend great deal for how strong it is. And the instant access part of it works great they make it super easy to install directions are amazing.

I recently bought the Hornady Rapid Safe, model 89180, to keep the home defense shotgun out of little hands. It works great, love that it's easily accessible, love that it's RFID, love that it's fast. One issue I was struggling with was the loud beeping when you pushed any of the key pad buttons, BTW not an issue if you use the key or RFIDs. The directions have a single rather vague sentence instructing how to turn off the keypad beep tones. I tried and tried and tried to get it to turn off the beeps but it wouldn't work. I called Hornady customer service and together we figured it out. What the directions don't mention is, the case/locker/safe whatever you want to call it must be IN THE OPEN POSITION before following the steps mentioned in the manual. Once I tried that, it worked flawlessly. One more thing, the RFID tag in the bracelet is located near the buckle in the rubber wrist band, not in the metal Hornady branded tag. Great product. I have already recommended it to others and will continue to do so.

Works as advertised. I bought one to install in my motorhome, to carry a 14" Remington 870 shotgun with Shockwave handgrip instead of a stock. The safe closes over the ejection port and also blocks the loading gate. It fits fine with the bulky MagPul fore-end pump slid back, but I hadn't realized that you must open the pump action to put the shotgun into the safe. So Hornady says the shotgun has to be unloaded. The safe has a metal block built into the inside that fits into the open ejection port, so the gun won't shift in either direction when it is locked. That why I gave it four stars instead of five. It doesn't work for a standby gun that you keep locked and loaded (without a round in the chamber) by the front door for emergencies. I'll do some experimentation to see if I can load the magazine tube but leave the chamber empty with the action open. The other issue with it is that while it comes with a separate wall fitting or bracket designed to capture the muzzle of the gun, and keep it from being used as a pry bar, it needs a similar support bracket at the other end if you mount it vertically, as I intend to do. Because without such a lower supporting bracket, when you pop open the safe, the shotgun can drop out of the safe onto your foot. But such a bracket should be easy to find in a hardware store and mount to the wall to support the butt of the gun. The safe comes with multiple methods for unlocking, including an electronic ID bracelet and some electronic tab stickers you can put on your phone or knife or wallet, whatever. When you place the object bearing the sticker near the safe, it opens. The safe also has some buttons that you program with a combination for opening without using those devices. The buttons might be a bit small to use sideways when your adrenaline is flowing, but that remains to be seen.

It barely fits with a picatinny rail, let alone having an optic/red dot or light. You have to create stand offs from the wall to mount the equipment. If you don't having a tactical light / laser will not not allow it to be properly aligned to close it up....RFID tags function as designed. The bracelet will not unlock the mechanism unless I remove it from my wrist and hold it directly on the touch pad.

I only own one shotgun, so I don't need a full safe. I like the easy accessibility this wall lock provides, while keeping the gun secure. This product meets the California DOJ requirements for firearm safety . It is lined with egg crate foam, so it will not scratch your gun. The Rapid Safe can be used with the included AC adapter (although the cord is pretty short, about 24 inches or so) or 4 AA batteries. The clam shell lid can be opened with a 4 to 6 digit combination (but your only integers to work with are 1-4), a key or with one of four included RFID tags. My wristband tag was not recognized by the safe, so I'm taking off a star from my review. I have contacted Hornady directly about this. As mentioned by others, the lid pops open with some vigor, so I would be careful if mounting this vertically on a wall, especially since there is nothing included on which to rest your gun's stock. One other thing that affected me, and that I frankly should have researched a little better, is that this wall lock is designed to work with side ejection ports ONLY. My shotgun's ejection port is on the bottom, so if I try to insert the chamber block into the ejection port, the shotgun will be oriented vertically, which prevents the lid from closing. I'm sure Hornady doesn't recommend this, but I solved the problem by simply laying the gun upside down on the foam with the ejection port up against the chamber block. The lid closes fine, and covers the receiver and the trigger. It does slide a bit (about an inch), but I think this can be solved by adding a little block underneath for the stock when I do mount it on the wall. Or, simply mount it horizontally. Update 4/3/18: I received a response from Hornady customer service today, and it appears that I made a mistake while trying to pair the bracelet with the safe. It turns out that the RFID tag for the bracelet is located near the buckle, and not the decorative medallion in the center of the bracelet. Who knew? Anyway, I am upgrading my review to 5 stars, based partly on their prompt customer service.

So I wanted to make sure all of my guns were under lock and key (because of my son in the home.) This does the trick! Love the RFiD tag. Although it certainly makes getting into it as simple as finding the tag... It is only meant to be mounted vertically (with a stud,) which is a drawback. You could mount it horizontally, but you would have to brace the wall really. Anyway, I hadn't realized either that it secures the gun through the ejection port. I though it was a really smart way to keep it in place and unable to fire while locked up. Install is 4 lag screws and takes all of 10 minutes.

works, but the mounting holes only allow you to mount it to your wall studs in the vertical configuration. If you want a SECURE horizontal config, you would have to first mount to a piece of wood that is 16 inches long and then mount the wood to your studs. Otherwise your gun would be resting on 1 single stud bolt and the other bolt would be hanging on drywall. If all you want is vertical, then its great. Also, the shotgun hangs by the ejection port with action open. This means if you want the gun totally ready to fire at a moments notice. you have to load the tube, then cycle the action, eject one shell and then hang it in the holder. Then when you get the shotgun out, you would have to close, open, and re-close the action to get a shell loaded for firing.

This fits my needs perfectly! Good quality quick access wall mounted containment. This is not what I call a “safe” like my “Fort Knox” but it wasn’t $8000 and weigh 2,000 lbs either. For $200 it does what it was designed to do. I did replace the hardware with longer 3 1/2” x 1/4” screws and washers as the hardware provided was much shorter.

Very fast to secure the shotgun and access,and several options for opening. I wish Hornady had left room for a holographic sight. I will certainly upgrade if a new design comes available.