LeMotech Junction Box, ABS Plastic IP65 Waterproof and Dustproof, Universal Electrical Enclosure, Outdoor and Indoor Project Box 5.9X 5.9X 3.9 inch (150 x 150 x 100 mm)

Required to weatherproof an outside coax line leaving the house to the back yardDid have to drill a hole into the back of the box for the coax, but spade bit cut the hole nicely and box held up to drilling well.Good product for the price

The item arrived quickly and is as specified. I purchased it so that I could enclose a trailer fuse box in it (which fits perfectly). I have not yet installed this box on the trailer so I cannot speak for it's weatherproof-ness. The white plastic seems robust enough. There's a good quality rubber gasket in the lid and the lid fits snug to the body so I'll presume that the water resistance is sufficient. The feed-through hole covers are very flexible and thin so I have a few doubts as to their weatherproof-ness but I can always replace them with electrical conduit plugs or plumbing plugs and seal them with RTV. For the price, I think that it will do the job very well.

I recently had the opportunity to work with the LeMotech ABS Plastic Dustproof Waterproof IP65 Junction Box, and let me tell you, it was an absolute game-changer! As an avid DIY enthusiast, I've come across my fair share of electrical project enclosures, but none have impressed me quite like this one. With its compact size, dustproof and waterproof capabilities, and overall durability, this junction box proved to be an exceptional companion for my electrical projects. In this thorough and detailed review, I'll take you through my personal experience, highlight its key features, and provide some helpful tips along the way.Personal Experience: From the moment I received the LeMotech Junction Box, I could tell it was designed with utmost care. The ABS plastic construction felt sturdy and durable, assuring me that it would protect my electrical components effectively. The compact size of 5.9 x 4.3 x 2.8 inches (150 x 110 x 70 mm) made it easy to handle and install in tight spaces. The white color of the enclosure blended seamlessly with the surroundings, giving it a clean and professional look.The waterproof feature of this junction box proved to be a real game-changer. During one of my projects, I accidentally spilled a glass of water nearby, and I panicked, thinking all my hard work would be ruined. However, to my surprise and relief, the LeMotech Junction Box held up brilliantly, keeping all the internal components completely dry. It exceeded my expectations and truly lived up to its IP65 waterproof rating.Key Features:1. Dustproof and Waterproof: The IP65 rating ensures that no dust or water can penetrate the enclosure, making it perfect for both indoor and outdoor projects. It gives you peace of mind, knowing that your electrical components are well-protected.2. Sturdy Construction: The ABS plastic material used in the junction box provides excellent durability, ensuring that it can withstand rough handling and harsh environmental conditions. It gives you the confidence that your projects will remain safe and secure.3. Easy Installation: The compact size and lightweight design of the LeMotech Junction Box make it incredibly easy to install. It comes with pre-drilled holes and screws, making the mounting process a breeze. Even for someone with limited DIY experience, I found it straightforward and user-friendly.4. Versatile Usage: This enclosure is suitable for a wide range of applications, including electrical projects, outdoor lighting, security cameras, and more. Its universal design and ample internal space allow for easy customization and adaptation to various projects.Helpfulness Tips:1. Ensure Proper Sealing: While the LeMotech Junction Box is waterproof, it's essential to ensure a proper seal to maintain its integrity. I recommend using silicone sealant around the cable entry points to prevent any potential water leakage.2. Plan Your Internal Layout: Before placing your components inside the enclosure, take some time to plan the layout. This will help optimize space utilization and ensure efficient wiring connections.3. Label Your Wires: To avoid confusion during installation or future maintenance, label your wires accordingly. A small touch like this can save you hours of frustration down the line.4. Regular Maintenance: While the LeMotech Junction Box is built to last, it's always a good idea to perform regular maintenance checks. Look for any signs of wear or damage and address them promptly to maintain the box's performance and longevity.Conclusion: In conclusion, the LeMotech ABS Plastic Dustproof Waterproof IP65 Junction Box has exceeded my expectations in every aspect. Its compact size, dustproof and waterproof capabilities, sturdy construction, and versatile usage make it an ideal choice for any electrical project. My personal experience with this enclosure has been outstanding, and I can confidently say that it has become an essential tool in my DIY arsenal. With the LeMotech Junction Box, I no longer have to worry about the safety and protection of my electrical components. It truly is a waterproof buddy that gets the job done!So, if you're searching for a reliable and efficient junction box, look no further than the LeMotech Junction Box. Trust me, you won't be disappointed!

I used this box to house 2 relays used for smart thermostats. They fit great and had enough room to add a third one if needed. The grommets worked well with the low voltage wires.

This little junction box works perfectly for me doing installation of cctv cameras

Used two of the 5.9 x 4.3 inch boxes several inches above the ground. The 4 cover screws are tiny, short, and need to find a tiny entrance hole at the bottom of a deep well slightly wider than the screwdriver shaft It took 45 minutes--using a powerful magnet attached to the screwdriver shaft to get 3 of them into place. The 4th would neither screw in or extract out. Having a second box to cover and dreading another opening & closing if there were circuit problems, I ransacked my screw collection and found my best substitute in 1-1/2" flush head deck screws. After enlarging the pilot holes they twisted in effortlessly in seconds, and covered the screw well at the surface, ending the blind probing with a screwdriver.Aside from that I liked the product. PVC thread adapters screwed directly into the side water-and air-tight. The hole plugs are thick and fit tightly. The 10-hole design perfect for my 4-lines of underground conduit, and the price was way better than the inconvenient 4-hole boxes traditionally used.

The media could not be loaded.  I got the 5.9x5.9x2.8 box and its good, I had a problem with an adapter socket not small enough to pass through the hole so I had to make it bigger by using a cutter and sealed the extra opening I made with silicone, so make sure you check the size of your sockets before ordering this to make sure they fit, otherwise you’ll have to manually modify the holes, which is not a big deal. I think the holes are about a 1 inch diameter. Still giving it a 5 stars because the is good I just had a size mismatch issue which my fault.

This works great for concealing dangling cable wires outside my house. The builder just left the wires hanging and I don't need cable, so this box was a life saver.

Used this junction box to terminate an outdoor speaker.Build quality is great and the rubber boots(grommets) are great for feeding wires through and ensure a tight seal. Front lid/cover did not appear to have a seal of any sort and is a clip-on style cover rather than threaded so there may be room for liquid to leak into the housing if it was used in an application where it is exposed to alot of this.

Se recomienda amplia mente muy buena calidad

屋外用の防雨仕様の4×４ＢＯＸを探していました。ノックアウトの防水パッキンがしっかりして浸水の心配は無いようです。以前は防水ＢＯＸと云えば金属製で浸水や錆に弱く大変でしたが、本品なら安心です。この価格ならお勧めです。

What would you use this box for? As an amateur radio operator I would use it for a coaxial cable entry point for my shack. Where the box is usually mounted low to give better access to earth stakes and where the cables come in beneath the radio. And for this it is perfect……until you go and try and reattach the lid.The holes for the lid screws are large but the screws are tiny. Not even my magnetic screwdriver could hold the screws horizontal enough to get these tiny screws centred in the large hole. Much swearing, much dropping tiny screws in the dirt, a sore back from stooping so low for so long and I was ready to kick this box to kingdom come. In the end the only way I could do it was to dip my screwdriver in silastic and shine a very bright light down the hole. Success at last but my plan to cut back drinking has failed tonight.

I bought this to house a circuit board that contains a wifi antenna for remote control of my pool pump. The requirements were that it be weatherproof, bug proof, and looks fairly good. First off I had to drill through the back to create mounting screw holes. Not a big deal. Second, the rubber grommets were high quality and you can cut through them to insert wiring while maintaining a fairly tight seal. No creepy crawlies going in so far, but as for weather I'll have to wait a year and update you. We get extremes in weather, 30 degrees Celius in summer, -30 degrees in winter. Hard on electronics to be sure. If you are using it as a true junction box you won't be disappointed.Ok one year update. The plastic corners are cracking, likely due to weather. Where I inserted the wires spiders are getting into the smallest holes. The gasket between the box and lid falls out, but I guess that's minor. I've learned that I need to seal the gaps in the grommets with silicone. I wanted to paint the whole thing black and whilst the plastic is easy, the soft rubber grommets did not take the spray paint well, leaving them sticky. Any suggestions? The electronics held up.