6 Port 2.5G Easy Web Managed Switch, 4 x 2.5G Base-T Ports, 2 x 10G SFP+, Static Aggregation,QoS/VLAN/IGMP, 2.5Gb Network Homelab Switch

I needed a media converter for my Mac Studio. But I wanted flexibility to do 1, 2.5, 5, 10Gb networking and media converters in this configuration are over twice the price of this device and are unmanaged. And not much smaller than this. I picked this up for less than $50. I got 4 ports that do all the ethernet speeds I wanted and a bonus 2 sfp+ that will do multi speed as well! I have not tested 10Gb thru put as I am still building things but it easily handles my 2Gb internet at full saturation with out ever dropping or slowing down. The web interface is pretty intuitive, although many features are turned off by default, like Spanning Tree which may effect performance. But it also has may other features shown of more expensive switches. The web interface is rather simple, but easy to navigate, and the CLI is like most router/switches with slight variations here and there that are easy to adapt. Makes for a perfect desktop switch for a power user or for someone that needs a few extra ports and wants some exapnability in the future for speeds. The only complaining is to SODOLA (what I affectionately call $50 dola, has a horrible name. but hey, the switch was less than $50 dola and it did everything it was intended to without fault.!.... now if 50dola would only make a central management software to manage multiples from a single pain of glass.....

For the price I'm shocked this is still working, and it's holding the rated speed. Over 6months now and no issues to date.

I didn't keep using this after testing but this switch works well for what it is. Unmanaged, very affordable... two SFP+ ports and the rest 2.5G RJ45. It's great to use for homelab or something, or if you need an SFP+ port to bypass an ISP device.

First off, the value here is crazy. Most major networking brands will charge close to double this amount for a 26 port 2.5g managed switch. If you need VLANs or port aggregation, this is a great pick. It works great out of the box, with great performance on both the 10g and 2.5g ports. I'm running fiber from this unit to another SODOLA switch and it was picked up and works with no configuration.There are a few quirks though. Software setup is a bit janky, requiring you to save your configuration to the device's boot storage manually for anything you do to persist after a reboot. Not bad, just something to be aware of. DHCP also doesn't seem to work, as my switch will randomly lose it's lease and won't get a new one until I reboot. Another minor issue for me, as you can assign a static IP so no worries there.The major quirk for me is the unit is not fanless as advertised. There's a single 40x20mm fan exhausting out the left side, and while it's not too loud, it generates a high pitched whine that's difficult to ignore if you have a quiet environment. If it wasn't for this, I'd rate this switch closer to 5 stars, but part of the reason I chose this one is because it was fanless. I can work around it, but it's annoying.

Works perfectly fine for me. super easy plug and Play. Way faster than my 1 gig switch I was using. Doesn't get too hot my 1 gig switch got way hotter than this one does which is a nice improvement.

It functions well!

Purchased 3x of these switches, from SOLDA to upgrade my home network. I got 2x 6 port with 2 SFP+ and one of the 8 port with 1 SFP+. I have most 2.5G RJ45 ports with cat5e on 2.5G and 1G. One of the switches tied into existing network that uses using 2x SFP+. It runs super cool compared to any other SFP switch I own. Overall the price is an excellent value saving me hundreds of dollars over name brand (for managed 2.5G switches). I have an existing Unifi network and didn't want to spend $200 more per 2.5G Unifi switch or wire in additional networking into my home.Speed: Iperf test TCP with 2 devices with 9k MTU on different ports in parallel for 30 seconds. 2.44Gb/s on one device, 2.46Gb/s on the other. UDP iperf tests showed 0% packet loss, 0.007ms jitter.Features: I am using the following features. All work well with minimal issues.VLANs tagged, native (PVID), and untagged. Jumbo frames at 9k. IGMP Snooping. 3x port LACP Trunk. RSTP with one SODOLA switch as root worked great and without any issues. QOS on Ports.Issues I faced:1. Admin interface was at 192.168.2.1 and I am under a different subnet. I first plugged it into my PC and setup DHCP and then moved it into desired room. One thing the interface doesn't tell you is you have to go to Tools -> Save to store settings when power cycles. Lost settings a few times before realizing it.2. My network doesn't have loops, but it went down multiple times during setup. What I found is that STP or RSTP must be enabled.3. Don't send ICMPs to the switch. I sent 9k ICMPs to test jumbo frames and every time it crashes the management interface and has to be power cycled.All issues were very minor with workarounds.