Ursprung H4/9003/HB2 Bulb, 30000 Lumens 800% High Brightness Plug-N-Play, Direct Installation Fog Light Bulbs, 1:1 Halogen Replacement Cooling Fan, Pack of 2

I just recently purchased these lights for my 2008 Dodge Dakota and have had them installed for a little while and have been very happy with them so far. The lights came well packaged with a good amount of foam to protect the lights in transit. It's generally a bad idea to handle led lights, or any automotive lights for that matter with your bare hands as the natural oils on your hands can cause damage to lights once they heat up so wearing gloves is a must and these lights come with gloves in the box for you to use. They are one size fits most but for the amount of time you will be wearing them to install the lights they work just fine. Installation was very easy, no different than installing a standard light bulb. The lights are very clear and bright with a good distance visible without the use of brights. With brights I can see even farther but I caution against the extensive use of brights as you can easily blind oncoming traffic. These may have the best light clarity out of the other LEDs that I've used with my truck in the past; even better than a pair of higher priced lights from the same company. I find very few downsides with these lights so far. They have some "dead" spots towards the bottom of the beam for me that are likely just from the light reflecting off the inside of my headlight assemblies. I have never had this, at least to this extent, with any of the lights I've used in the past and I attribute this to the clarity of the lights though the dead spots are only really noticeable when the lights are shining on a wall in front of the truck and not while driving. The other thing is that at least with my personal application, the lights do flicker when turned off and a little bit when the high beams are on so a can bus unit is needed to fix this. This isn't the first time I have had this issue with lights but I have worked with their customer service who were very friendly, knowledgeable, and responded with help almost immediately after I contacted them. So keep the flashing in mind when ordering these for this application as you may have the same issue.Pros:-Good packaging with included gloves for install-Very good price for the quality of product you get, I feel as though they could charge double or even triple the price and it wouldn't be too much-Light quality is very good and reaches far, as good as or better than much higher priced lights I have used in the past-Very good customer serviceCons:-Lights do flicker on my truck, though it isn't noticeable when driving-Some dark spots in the lights field though again, this isn't really noticeable when drivingOverall I think these lights are very good, especially for the price. Would buy again.

The media could not be loaded. I have gone through a transition of many different sets of lights for my 2018 Ford Edge. Initially, I upgraded my halogen to a better grade of halogen then I tried early release of LEDs, which I was very disappointed. I finally settled on HID headlights for many years. Recently, someone suggested I look into LEDs again because they are so improved versus the earlier days. I purchased one set of LEDs and have been using them and thought they were pretty good but I was still looking for something better. These headlights were purchased to replace the previous set of LEDs that I was thought I was happy with. The first part of the exchange was the simplicity of installation. The new bulbs mirror, the shape and design of an original bulb so they go in very easily. The previous version of bulbs had a 6 to 7 inch dongle that had to be tucked into the light housing. For the initial testing, I only installed the new set of bulbs, both high and low beam on the left/driver side. This would give me a way to make a direct comparison to the previous version. The enclosed pictures show on low beam the new LEDs have a much wider pattern and bigger hotspot in my 2018 Ford Edge. Once I went out on the street, you can see that the old beam is more of a central beam without much width. When you have both of the new LEDs installed, there is no dark area in the center of the lane. Once you turn on high beam, which the video shows, everything is pretty much lit up, including the trees and all things on the sides. The part of these lights that is most impressive is the price point that includes both high beam and low beam bulbs. Many bulbs on the market cost as much for one set of bulbs that these cost for two. If you’re looking for a good LED replacement bulb, these are certainly an excellent choice and I highly recommend them.

I’m really impressed with these LED fog lights! They’re a huge step up from my old bulbs, throwing out bright, crisp 6500K white light that cuts through fog like nobody’s business. Swapping them in was a breeze—literally 10 minutes with no tools or mods, thanks to the plug-and-play setup. The beam is focused, lighting up the road without dazzling other drivers. No flickering or dash errors on my 2018 Honda, which is awesome for the CANBUS system.

Bought these for my wife's 2006 Pontiac solstice. It took less than five minutes to install these new bulbs. They are so much better than the halogen blubs.

I installed these when I made an upgrade to LED lights on my 2012 Yamaha_Zuma_125. They work good but the high beams do not work well on my scooter. Low beams are bright enough that I really don't need the high beams. I think there might be a different application for scooters and passenger vehicles high/low beam.

I’ve never rushed to do a review but this light is awesome! I ride a motorcycle on a dark back road to work with a tinted helmet visor and this light shines bright! I don’t even need my high beams! The lines on the road and all signs are reflected like a half mile down the road I’m ordering for a car next

Why did you pick this product vs others?:Good for my car great beam

Very good quality