TP-Link TL-PA8033PKIT AV1300 Gigabit Passthrough 2x2 MIMO Powerline Adapter Starter Kit, Powerline Network Adapters with 3 Gigabit Ports for Smart TVs or Game Consoles, No Configuration Required

These powerline are adaptors are very easy to set up (basically just plug them in, connect up the Ethernet cables and go). They are fast, using MIMO technology to improve connection speed. The mains passthrough was essential for me. I can't afford to lose one of my wall sockets.I have used them to setup a network connection to our annexe (Wifi didn't work well, since the intermediate walls are thick stone!), one is connected to the ADSL router, and the other to an external ethernet cable that runs through to the annexe. I am getting about 350Mbps this way over a distance of about 50', which I am happy with (my best wifi setup was < 1Mbps with frequent dropouts and only partial coverage). As a bonus, I have been able to wire up my Sky TV box and Apple TV, giving a more reliable and faster network connection. There is a button on the side that allows you to secure the network when you set things up. I have done this, though it probably doesn't matter much in my home setting. In a public setting, this would be essential of course.One of the adaptors has three Ethernet ports and the other has only one. This works for me, but since my router only has two ports, I've had to buy an external ethernet switch as well. This was still cheaper than the starter package that has two 3-port adaptors. These ones have no Wifi (I didn't really need that, and again the price was high to add it - about £40).In service, the adaptors have been reliable. The only connection problems I've had have been with loose connections (old cables).Do make sure you use high-speed Ethernet cables and buy new ones if you need to. Good Cat6a ones can be had very cheaply now, though Cat5e/Cat6 should be good enough. Once I'd replaced my old cables with new Cat6a ones everywhere, my network has been running well. The only other problem I have is that my subwoofer is picking up interference.The network management app lets you see the point-to-point throughput rate and change a few simple settings (whether the LEDs are on, traffic prioritisation, name). It's basic, but works well. You need to be connected to the same subnet as the adaptors to use it (I can't connect to it from my laptop via wifi for example).The adaptors themselves are quite sleek and modern looking, but mine are hidden away, so appearance wasn'ta deciding factor. Overall, I'm pleased with these. I would happily buy more if I needed to connect anything elsedirectly. They are a lot less trouble than wifi and are a valuable addition to my network kit.

Never used these kinds of devices before, and after some research, I opted for the TP-Link TL-PA8033PKIT AV1300 model. I've been using it now for roughly 2 months, and have been pleasantly surprised by the result. The signal I'm getting, which unfortunately is capped by the adapter well below what you'd expect from Ethernet speeds direct from your router, is more than enough to play YouTube in high definition, and stream content from the likes of Netflix, Disney+, and the Sky Sports web browser app without buffering issues. I like to watch my shows when I do my long runs on the treadmill, and I can do so now without my videos pausing to buffer.Now, why powerline adapters? Because I researched a range of options before arriving at this one. Our house has solid brick walls coupled with layers of insulation, which is a nightmare for Wi-Fi signals. The hope was to get a decent Ethernet connection in a garden shed, and unfortunately, running an Ethernet cable from the house to the shed just wasn't feasible in our case. Too many holes needing to be drilled, through those aforementioned thick stone walls. And whilst our Wi-Fi signal reached the shed, it was patchy at best. Video streaming worked, but the quality was awful; I could barely watch Snooker on the BBC iPlayer, for example, without facing the dreaded spinning buffering wheel every minute or so. That's when I researched these 'powerline' adapters. And I’ll be honest: I thought they’d be a waste of time and money. Glad I was wrong. Mine works, doing all the things they suggest you not do when setting them up. The adapter connects to the main router using a Network Switch, I don't have a baldy notion if the house's electrical wiring causes interference, and the adapter that lives in the shed is plugged into a surge-protected gang socket. Setting them up was as easy as hitting 'Pair'. It hasn’t run hot, its signal hasn’t dipped once; it’s been a solid addition to the shed that has, more-or-less, solved whatever connectivity issues we had before.From this adapter, I'm running three Ethernet cables: a Wi-Fi range extender which has more-or-less fixed the stability issue of Wi-Fi in the shed and also extends our signal across the garden, a mini PC I use to watch my streaming services when I use the treadmill, and an Ethernet-to-USB C cable so I can hard-wire my phone and tablet. The pass-through plug has also been useful, and in it, I’ve got a plug with two USB 3.1A sockets and two USB-C sockets. One of the 3.1A sockets powers the TV’s Chromecast without issue, and the other provides a charging lead for an old phone my brother uses as a camera when he’s playing dart matches online. Now, hindsight is 20/20 as they say. At the time I bought this, the model that comes equipped with a Wi-Fi option was a little more expensive. I should have just gone with it. The Wi-Fi range booster I mentioned further up does the same thing, and ended up costing slightly less, but I should have just opted for the Wi-Fi model. You live and learn.

I bought this to replace a broadband extender kit (also "powerline") that had died. It was very easy to set up, pairing quickly, and seems to work very well. It is supporting this connection as I type.The only disappointment - and it's my fault - is that I thought that in addition to the ethernet ports it was also a wireless hotspot, as was my previous kit. Unfortunately it's not, hence no stars for wi-fi signal, but you can't criticise a product for not doing something it isn't built to do!My only real criticism is that it is physically large - so much so that in a normal UK switched double socket it blocks access to the switch.

I have just received and installed the TP Link AV1300 3-Port Gigabit Passthrough 2x2 MIMO Powerline Adapter and the setup was very easy. Follow the quick install guide and you can be up and running in 5 minutes. My office is in a deadspot and my Virgin Media V3 Hub was not getting near it. I had been using a BT Wifi Extender 300 but was only getting around 12Mbps in the office. I needed something better as I WFH most of the time and a powerline adapter was recommended to me by a colleague. I plugged the single port adapter in next to my Virgin hub and plugged the other one in next to it so they could be paired. I found that turning them off/on again completed the pairing but might work straight away for others. I then moved the 3 port into the dead zone office, plugged in one of the two supplied ethernet cables and did a speed test - straight up to 120Mbps! Do remember that these adapters work on your home internal wiring so results may vary for those with older or poorly wired properties. This has really saved me a huge amount of time as I was going to run a ethernet cable up the house and through the loft. Thankfully I can avoid that task now.