SlipstickCB325 Non Slip Furniture Feet Floor Protectors with Rubber Grip (Set of 8 Grippers) 1-1/4 Inch Round - Chocolate Brown

I added these to my iron chairs I use on my new Trex deck. These happen to be the right diameter; 1 1/4 inch, for the inside diameter of these chairs. They are just thick enough so I did not have to modify in any way. Just used the peel and stick since they will always have force on them. If they become loose, I can glue them on. They definitely work as skid proof and protection for the floor. I used these on other furniture for my hardwood floors and they work well. I used the included screws to attach to the wood chairs in that case.

I have a large kitchen table that has an annoying habit of walking around the kitchen. The floors are composite wood, and the wooden base slides very easily. Second, the table is just a little bit too low to allow our wheeled kitchen chairs to slide under the table. These little guys solved both problems.=== The Good Stuff ===* They get quite a good grip on the floor. Our floor, a laminated composite, is fairly slippery- even athletic footwear doesn't always get a good grip on it. These little feet manage to get a reasonable grip on it. You can still slide the table, but you have to use enough force that it doesn't happen by accident. Even the dogs (3 large ones) bumping into it doesn't seem to move the table..* The feet also added about 3/8 of an inch of vertical height to the table. This provided two advantages. First, the table is now high enough that the arms of our chairs can fit under it, which gets them out of the way. Second, air can now flow between the bottom of the table and the floor. That keeps things cleaner, and eliminates the nasty stuff that seems to live under there.* The color of the units matches up well with my wooden (pine) table. Even though they are visible from the sides, they disappear unless you are specifically looking for them.=== The Not-So-Good Stuff ===* The feet come with both screws and double-sided tape already attached to them. I wouldn't trust the tape to hold these on anything that gets any lateral movement at all. The adhesive on tape is just not strong enough, especially if the table surface is a bit uneven, varnished or painted. I bought some slightly heavier screws than the ones included (#10, 2" stainless steel) because I didn't want them to pull out and damage the table. I chose stainless steel because I didn't want them to corrode if exposed to moisture.=== Summary ===They worked great for my application, a table that doesn't move (and isn't supposed to move much). I am not a fan of tape and adhesives for mounting something like this, and I am glad I went with the larger screws. The plastic seems fairly hard, so I expect them to hold up for quite a while.

I like the way these are made but in the end I was not able to use them. I got them with hopes of using them to swap out with the semi hard plastic ones on the bottom of an eletric recliner love set that in spite of all thwe weight moves around a lot. These were the exact diameter of the old feet and about half the height. I could have worked with the height but the show stopper was that the screws were the type with a washer built onto the screw head and that washer was too big to fit in the depression in the middle of these. The hole was also too small but I could have drilled that out. I think the depression was also too shallow for the screw head even had the washer fit in the hole. Perhaps I will find another use for them elswhere. They do have good grip although not much ruber protrudes so I'm not sure they would do well for very heavy furniture. These are more suted for something like a light chair.

Ok this product works so well now I can’t move my couch without help. Definitely solved the problem of my recycling sofa sliding. Now I’ll need help if I even want to switch to a different wall. Comes with screws but I can’t use adhesive works but when I tried to move couch I had to lay it on its back and it squished the slipstick off a little. Overall works great

I wanted to write a review to give more detail on the application of this product. I wasn't sure how this would perform for a very specific task. I have laminate floors and the dining room set we have has angled chair legs (NOT straight 90 degree angles). Up until this I have been periodically purchasing swivel nail-on felt pads for the chair legs. This kind work great, the problem is that they wear out over time and they are not what I would call cheap at local ACE hardware store. So, I thought I would try Slipstick and while they are quality made, I think they would work best in a situation where the furniture piece has 90 degree straight legs and the piece is not intended to be moved frequently (like a chair). However, I do think they will last a while longer then their felt counterparts.

I bought one pack of these to try them out. I liked them so much have have bought additional packs.Pros: - gives just the right amount of grip - size fits a lot or types of furniture - durable - stick or screwCons: - much pricier than felt pads - can't trim them to the size of the furniture feet like you can with felt padsThese Slipstick gripper feet are great for furniture that you want to stay put most of the time. I put them on an arm chair and associated ottoman. Now the ottoman isn't always sliding away from under my feet! The ottoman is still slidable by hand, but stays put when I want it to. Just the right amount of grip. These are not something you would want to have on kitchen chairs that are constantly being pushed in and out.They are also very durable; they aren't going to wear out like felt pads. I like the option to screw or stick. Each foot comes with a double-sided stick foam piece attached. Very easy to attach quickly or very securely. I have found that the quick stick works for me.My only complaint is that my chair legs are a little narrower than the feet so the feet stick out a bit. It isn't too noticeable, but I would like narrower ones.

These work perfectly. I had others that let my stools still slip on the hardwood. These grip and they don't slip At All! Love them.

These floor protectors are excellent. They stop the chairs from sliding around and do not damage the floor.

These are really good floor protectors.

Leider passten die Maße nicht, aber es gab überhaupt kein Problem in der Rückabwicklung. Ansonsten sahen sie sehr stabil aus.

Does the job but didn't last long

These work great! I installed them on the bottom legs of my mom's chair. Now feel better that it won't slip out from underneath her now.